PRICES/PRODUCTS
updated 12/2009

Custom design and machine work is our specialty


kits and frames for ag tractors
RED   |   GREEN   |   BLUE   |   ORANGE   |   ANTIQUES

1066 wheelie bars
$550/set
1066 Hitches
$1150


kits and frames
for component tractors

(kit includes 4- 2" dia. prebent rails, 1 1/2" cnc coped cross tubes, and assembly instructions)

TIG welded  Chassis Rails -----$1995.00
RED   |   GREEN   |   BLUE   |   ORANGE   |   MODIFIED

some that customers have built here

$225.00
(required for 2008)




REAR HOUSING


Specify chassis centerline  
22" (Ford,IH)  
24" (JD)
or 26" (BBJD & Agco)

lightweight version
 $ 2495.00
(aligned for axles, end plates welded, machined true, tapped, bored and ready to accept Franklin planetaries and Rockwell carrier.
 Drain plug, vent, and sight glass.)

$775.00

(includes lightened hitch plates,
side support gussets,holes for drawbar and 2nd hitch, plates for drawbar adjustment,
position of drawbar hook point from center of axle built in)

$400.00

(includes 1" dia. pin, lynch pins, and bolts )

2nd hitch ----------------------------- $100.00

These kits are legal for Light Super Stock, Heavy Super Stock, Pro Stock, and Modified tractors
according to NTPA and ATPA rules regarding hitch design, location, and drawbar specs.
 Hitch height will be correct when using Puller 2000 tires or equivalent



ROLL CAGES

OCTAGON                                                                                 BULLET   
$750                                                                                        $650                                                         
HAIRPIN
$600
DIAMOND
$650
custom shapes  --------$850.00


SFI required plates (1/4 X 6) for bottom of cage
solid bar stock ------- $50.00
lightened burnouts ---------- $150.00

*discounts for two or more kits - call for quote



Weight Racks
 for 22", 24" or 26" centerline
$795.00
two styles available

(weld on, 150#  total weight, space for 16 IH weights, tow hook)
$995.00

(removable, up to 20 IH weights, tread plate steps for ends)
$550.00

(removable, up to 8 IH weights - slides in top part of chassis tubes)
wheelie bar braces w/ pads - $95.00


---------------------------------------------------------------------------------------------------------

FRONT AXLE



Xtra heavy duty axle
designed specifically for manual steer applications
no power steering needed

Limited Light, Light Super, Heavy Super, Modified, TWD, Pro Stock, Super Farm, Hot Farm, etc.
for 3" solid round axle add $300

front axle
$425.00

with lightening holes $575.00
(custom engraving available instead of holes)
Xtra heavy duty billet steel spindles
 $450.00 ea.
lifetime warranty!

steering arms
$65.00 ea.


billet aluminum hubs   $150.00 ea.
steering rack
$160.00 ea.
(requires shortening of steer rods - all models)
polished aluminum steering rack mount  $195.00
bearing/seal kit - $95.00

complete axle ready to weld in  
$2000.00


axle mounting plates with choice of logo
$325
optional polished aluminum logo, any brand - add $150


---------------------------------------------------------------------------------------------------------

Below is a partial list of parts needed to complete a tractor

standard
upgrade

Cast chunk --------------- P.O.R.
(with choice of gear ratio, needle cross installed,
housing machined, bronze or needle bearing thrust washers, ready to run)
Aluminum chunk -------------- P.O.R.
(with choice of gear ratio, needle cross installed, housing machined,
bronze or needle bearing thrust washers, and steel reinforcement plate for pinion bearing, ready to run)


standard
upgrade
Cast planetary housings and gear set

price on request
Magnesium planetary housings for Franklin gears
(lightweight upgrade)
P.O.R.
Aluminum planetary covers --- P.O.R.
Custom planetary covers ------ P.O.R.
(engraved & polished)

axles ----------------------- P.O.R.

aluminum sheet metal covers with
24 hardened flange nuts and chrome caps
$295.00
this is a nice touch, hides all bolts, nuts, and hard to polish wheel flanges





BRAKES

Billet brake calipers
$850/set
Steel brake rotors
$350.00/set
Polished billet pedals
$425.00/set

Brake caliper mounts -------- $60.00







Chassis KIT
Included in package:
 welded chassis rails ready to bolt/weld to rear housing,
fabricated SQHD housing, hitch kit, drawbar, front weight rack parts, skid bars, and roll cage kit - $5895.00 (Heavy version*)
*For light super housing and drawbar add $700.00*

Flex-Frame™ tractors and TWD trucks are only done as complete rollers or turnkey - call for details and pricing


TERMS:
chassis kit requires $1000.00 deposit - call for availability
normal delivery is 2-3 weeks from the time we can start

For rolling chassis - $3000 deposit, balance due upon completion of chassis.
(3-6 weeks)

turn key vehicles, 50% deposit, 75% when motor is started
(12-16 weeks)
100% before it goes on your trailer.

 Due to a lack of understanding that ACE is not a lending institution, Nothing leaves until it is paid for. No exceptions

there is a waiting list, please call in advance to schedule your custom built puller


Flex-Frametechnology.
Everything else is just a waste of tubing.

   
About ACE   |   About COMPONENT TRACTORS   |   FRAME MATERIALS   |   AIR FLOW   |   FABRICATION   |   LASER TESTING   |   FLEX-FRAME   |   PROTOTYPE   |   NEW PRODUCTS   |   SITE MAP   |   PRICES/PRODUCTS   |   CONTACT   |   CUSTOM PARTS   |   MORE CUSTOM PARTS   |   BEFORE/AFTER   |   BEFORE/AFTER part 2   |   PICTURE BOARD   |   TRACK SHOTS   |   VIDEO   |   MISC
"The bitterness of poor quality remains long after low pricing is forgotten!"
                                                      Leon M. Cautillo